Heart to hang

Craftideas
Heart to hang

Difficulty

Duration

90 min

Download Idea as PDF

Share Idea

Instructions in 4 steps A heart-shaped metal ring wrapped with yarn. Die-cut paper hearts - attached to a wire - enhance the heart centre.

Besides the articles listed below, you also need: Hot-melt glue gun, scissors

And this is how it works:

Step 1

First cut off 4.5 m of the yarn. Affix one end with a drop of hot-melt glue to the tip of the heart-shaped wire. Now the whole heart needs to be densely covered with yarn. Then stick the end back on firmly.

Step 2

Take 4 small twigs of eucalyptus. Starting at one end, attach them to the brass wire, spacing them about 8 cm apart. You could ripple the wire slightly between the twigs. Do the same thing on the other end of the wire, but this time with 5 rose buds.

Step 3

For the suspension hook, cut off 50 cm of the yarn, knot its ends together and attach it to the top centre of the heart. Tie the brass wire with the 1m organza ribbon in the middle of the top of the heart.