Wooden cacti put-up hinge

Craft Idea Wooden cacti put-up hinge

Wooden cacti put-up hinge

Difficulty

difficulty

Duration

60 min
Instructions in 4 steps You can magnetise some parts of the standing cactus by means of our magnetic primer. And this is how it works:
1

Step 1

Wipe the cacti elements by means of the paint sponge and leaf green All Purpose paint. Once all of them have dried well out, plug the four single elements together, so that you get a big and a small cactus. Put the small cactus aside.
2

Step 2

When it comes to the big cactus, coat one or more of its side elements with the magnetic primer. To do this, use, at best, the flat brush. Repeat this step twice up to three times in order to reach an intensive magnetic effect.
3

Step 3

After 3 hours of the magnetic primer drying, you can paint it over with the leaf green All Purpose paint.
4

Step 4

At the end, paint the spines on both cacti with the alabaster white All Purpose paint by means of the round brush. With the magnets, you can attach small memos and notes to the big cactus. Your Memoboard is ready!
Used products For this craft idea, you need the following products of Rayher:
All-purpose paint, leaf green
item no. 38000428 All-purpose paint, leaf green
bottle 59 ml, leaf green
(1/8 bottle)
All-purpose paint, alabaster white
item no. 38000105 All-purpose paint, alabaster white
bottle 59 ml, alabaster white
(1/100 bottle)
Magnetic primer
item no. 3881100 Magnetic primer
bottle 250 ml
(1/15 bottle)
Magnet, 6 mm ø
item no. 8956800 Magnet, 6 mm ø
thick 1 mm, tab bag 20 pcs.
(3 bottle)
Equipment For this idea, you need the following little helpers:
Painting sponge
item no. 3824100 Painting sponge
tab-bag 3 pcs