Wooden frame „Winter Wonderland“

Craftideas
Wooden frame „Winter Wonderland“

Difficulty

Duration

60 min

Download Idea as PDF

Share Idea

Instructions in 10 steps

Besides the articles listed below, you also need: Tinfoil, paper towel (Zewa), saw, batteries

And this is how it works:

Step 1

Put together the cut to size slats, upright. Let them dry well out.

Step 2

Paint the wooden frame and the trees from the outside by means of the white paint Chalky Finish. Then let them to dry thoroughly out. Leave the deer & roe deer in the natural wood hue.

Step 3

Paint the wooden lettering „Winter Wonderland“ with the midnight blue paint Chalky Finish. Allow to dry out as well.

Step 4

Take the dried-out wooden frame and stick it onto the upper edge of the double-sided adhesive tape and pull off the protective foil from the adhesive tape. Smooth out the 3D effect-foil and press the wooden frame onto it. Cut off the exceeding foil at the outer edge by means of the cutter.

Step 5

Lay the crepla sheet on the cutting mat, put the wooden frame over and cut it with the same cutter.

Step 6

Attach the painted lettering from the inside to the acrylic glass of the frame using the double-sided adhesive tape.

Step 7

Stick the trees with the double-sided adhesive tape, possibly also the deer & roe deer in the box.

Step 8

Insert the wooden frame with the glued 3D foil into the frame. Spread out the lights behind it. The battery compartment of the light chain runs outwards.