
Instructions in 8 steps Mushrooms in all their many variations: Paint the wooden mushrooms in bright colours and decorate them with twigs and moss inside the Raysin bowl – your autumn décor is all set.
Besides the articles listed below, you also need: Stamp cleaner, mixing vessel, poss. sandpaper, paintbrush, scissors, hot-melt glue, hole punch pliers
And this is how it works: 1 ![]()

Step 1
Mix Raysin and cast the bowl, allow to dry out, then demould (if necessary, do some additional sanding). After it has thoroughly dried, paint each mushroom on the bowl with the acrylic paints saffron and sandalwood.2 ![]()

Step 2
Mix Raysin and cast the bowl, allow to dry out, then demould (if necessary, do some additional sanding). After it has thoroughly dried, paint each mushroom on the bowl with the acrylic paints saffron and sandalwood.3 ![]()

Step 3
Mix Raysin and cast the bowl, allow to dry out, then demould (if necessary, do some additional sanding). After it has thoroughly dried, paint each mushroom on the bowl with the acrylic paints saffron and sandalwood.4 ![]()

Step 4
Mix Raysin and cast the bowl, allow to dry out, then demould (if necessary, do some additional sanding). After it has thoroughly dried, paint each mushroom on the bowl with the acrylic paints saffron and sandalwood.5 ![]()

Step 5
Paint the wooden mushrooms with the acrylic paint.6 ![]()

Step 6
Glue the plug-in brick inside the bowl, insert the Maidenhair vine twigs and moss into the brick, then fix the mushrooms on using some glue.7 ![]()

Step 7
Stamp the card, cut out, round off the corners using the corner punch and pierce a hole using hole punch pliers.8 ![]()





