Raysin stones Statement

Craft Idea Raysin stones Statement

Raysin stones Statement

Difficulty

difficulty

Duration

60 min
Instructions in 5 steps Take-away messages of happiness: Creative statement motifs turn Raysin-cast stones into charming decorative keepsakes.
Besides the articles listed below, you also need: Mixing vessel, poss. sandpaper, poss. masking tape to secure the stencil (on curved surfaces)
And this is how it works:
1

Step 1

Mix the white Raysin according to the pack instructions, then cast 2 stones.
2

Step 2

Once set for at least an hour, demould the stones and allow them to dry completely, preferably overnight.
3

Step 3

Cut out the texts from the screen-printing stencil and place them on stones. If needed, use the masking tape to hold them in place around the curves.
4

Step 4

Use a flat paintbrush to apply red and black artist’s acrylic paint in an even coat over the stencil, following the pattern. Carefully remove the stencil, then clean it with water. Allow the paint to dry thoroughly.
5

Step 5

Apply the clear varnish Gloss, richly and evenly, using a flat pinsel. Let it dry thoroughly.
Used products For this craft idea, you need the following products of Rayher:
Casting powder  Raysin  200
item no. 3699000 Casting powder Raysin 200
bag 1 kg
(ca. 300g)
Silicone casting mould Stones, big
item no. 36107000 Silicone casting mould Stones, big
14.5x26x3.5cm, 3 moulds, box 1pc
Artist's paint set - Acrylic
item no. 38926000 Artist's paint set - Acrylic
24 colours x 12ml, set
Clear varnish, glossy
item no. 35092000 Clear varnish, glossy
bottle 80ml
(1/40 bottle)
currently not available