Glass bottle "Let it glow" Saying & stars

Craftideas
Glass bottle "Let it glow" Saying & stars

Difficulty

Duration

30 min

Download Idea as PDF

Share Idea

Instructions in 10 steps Turn a glass bottle into a decorative light - with golden sequins and white feathers, it enhances your home.

Besides the articles listed below, you also need: Scissors, detergent, vessel with cold water, cosmetic tissue, hot-melt glue,kitchen roll, button cell battery CR 2032

And this is how it works:

Step 1

Clean the glass bottle with water and detergent.

Step 2

Fill the vessel with cold water. Cut the writing and the stars to shape and apply them according to the instructions.

Step 3

Remove the transparent transfer foil in approx. 4 hours.

Step 4

From the sequin mix "Glam", take the sachet with the silver hologram sequins and the matt gold sequins. For the winding at the bottle neck, you need about 5 sequins per each.

Step 5

String these sequins alternately onto a piece of silver wire of approx. 70 cm.

Step 6

Wind the golden glittered tape 4 times around the neck of the bottle and affix it on the rear side with the hot-melt glue.

Step 7

Now wind the silver wire with the threaded sequins around the tape and distribute the sequins at any distance apart from one another. Connect the wire ends together on the rear side.

Step 8

Sprinkle the remaining sequins alternately with the white decorative feather into the bottle. Stick the battery compartment to the bottom of the cork lid with the hot-melt glue and wind the coated wire around the compartment and fix it in place.