House decoration with transfer rub-on

Craftideas
House decoration with transfer rub-on

Difficulty

Duration

30 min

Download Idea as PDF

Share Idea

Instructions in 6 steps The colourful motifs from the ‘Rub on’ transfer foil are easy to apply to various surfaces and ensure a smooth transfer without wrinkled edges.

Besides the articles listed below, you also need: Paintbrush, scissors, tweezers, double-sided adhesive tape, mixing vessel, poss. sandpaper, poss. wooden frame to set (item no.62 840 505), poss. Allround Paint acrylic, sandalwood (item no.35 077 506)

And this is how it works:

Step 1

Mix about 150g of Raysin following the instructions on the package and cast a house using the silicone casting mould Houses.

Step 2

After about an hour's drying time, carefully remove the house from the mould. It would be optimal if the house could dry out for another day or two. If necessary, you can sand its edges using sandpaper.

Step 3

Cut out the motifs from the transfer foil „Rub on“ Flower Cat Home using scissors.

Step 4

Then transfer these very same motifs, one after the other, on the dry house. Next, remove the carrier foil from the motif, place the motif at the designated spot and rub it with a blunt object, such as the handle of a pair of tweezers. Finally, remove the protective foil.

Step 5

For the roof, take the two wood pen blanks and glue them to the house using the glue fix pen. Let it dry well out.

Step 6

The final stage involves designing the wood frame House. Paint the roof with the white acrylic paint. Then let it dry. Repeat the 3rd and 4th steps and transfer the rub-on motifs onto your house. A pretty decoration would be the designed houses inside a wooden frame. In this particular case, paint the rear side of the frame with sandalwoodcoloured acrylic paint.

Craft Idea House decoration with transfer rub-on