Jewellery pendant tag with gold lettering

Craftideas
Jewellery pendant tag with gold lettering

Difficulty

Duration

30 min

Download Idea as PDF

Share Idea

Instructions in 9 steps The template with vintage lettering provides the pendant out of jewellery cement with this special lettering. Coat the template with foil glue, put the mirror effect foil over and remove any excess foil with your fingers. And this is how it works:

Step 1

To cast the jewellery-cement-pendant you need an elastic casting mould, a digital scale and a small plastic container as well a craft wooden stick for stirring. The mixing ratio: 1 part of water : 5 parts of jewellery-cement.

Step 2

First, weigh the water in a cup and then add gradually the jewellery-ce-ment. Stir it with a craft wooden stick until a homogeneous mass arises.

Step 3

Now, you can fill the mould with the casting compound. The mould should always be cleaned with detergent and water before being filled. If bubbles occur, you should tap few times the mould on the pad.

Step 4

The temperature and the current air humidity determine the drying time. It is however advisable to demould the pendant only the next day. Allow post drying.