Orange-coloured tag out of Raysin

Craftideas
Orange-coloured tag out of Raysin

Difficulty

Duration

60 min

Download Idea as PDF

Share Idea

Instructions in 12 steps Put these special vernal label-pendants in the casting mould before casting. The orange-coloured powder makes your Raysin pendant look really spring-fresh.

Besides the articles listed below, you also need: Plastic cup, scotch tape

And this is how it works:

Step 1

Place the label in the casting mould with a motif facing up. Affix it by means of the double-sided adhesive tape.

Step 2

For the tag, stick crosswise one strip of the scotch tape over the upper part of the rectangular casting mould.

Step 3

Glue some scotch tape onto the blunt side of the wooden skewer.

Step 4

Pierce the stretched scotch tape in its middle with the wooden skewer and insert the glued blunt side of the skewer through.

Step 5

Mix the tangerine-coloured pigment with the Raysin casting powder in a small vessel. Blend it evenly. According to the desired colour intensity, you have to put more or less colour pigment.

Step 6

Mix the blended casting powder with water.

Step 7

Then pour the colorfully stirred Raysin quickly into the mould.

Step 8

After about 30 minutes, demould the gift tag. The wooden-skewer can be removed.

Step 9

Remove afterwards the label with for e.g. the tip of the wooden skewer or a head pin.

Step 10

Before decorating and hanging the tag, allow it to dry out completely for several days. In addition, pull the decorative string through the hole of the tag and thread the glass large hole wheel bead on.