Bottles-tag

Craftideas
Bottles-tag

Difficulty

Duration

30 min

Download Idea as PDF

Share Idea

Instructions in 8 steps These pinkish pendants are quickly cast out of Raysin casting powder and decoratively enhance the glass bottle.

Besides the articles listed below, you also need: Plastic cup, scotch tape

And this is how it works:

Step 1

Place the label in the casting mould with a motif facing up. Affix it by means of the double-sided adhesive tape.

Step 2

For the gift tag, stick crosswise one strip of the scotch tape over the upper part of the casting mould.

Step 3

Glue some scotch tape onto the blunt side of the wooden skewer. Pierce the stretched scotch tape in its middle with the wooden skewer and insert the glued blunt side of the skewer through.

Step 4

Mix the fuchsia coloured pigment with the Raysin casting powder in a small vessel. Blend it evenly. According to the desired colour intensity, you have to put more or less colour pigment.

Step 5

Mix the blended casting powder with water. Then pour the colorfully stirred Raysin quickly into the moulds.

Step 6

After about 30 minutes, demould the gift tag. The wooden-skewer can be removed.

Step 7

Remove afterwards the labels with for e.g. the tip of the wooden skewer or a head pin.

Step 8

Before hanging the gift tag with a small cord or organza ribbon onto the bottles, allow it to dry out completely for several days.

Tip: If you want to decorate the bottles also with a coloured edge, you can dip the bottles into a higher beaker before casting into shape. But you must do it very quickly and prepare everything promptly.

Craft Idea Bottles-tag

Bottles-tag

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Pink-coloured gift tag

Gift tag „Sunshine“

Orange-coloured tag out of Raysin

Pendant out of cement „House“