Small kneading-cement ball with circles

Craftideas
Small kneading-cement ball with circles

Difficulty

Duration

120 min

Download Idea as PDF

Share Idea

Instructions in 9 steps For the circles on the ball out of concrete, roll out the kneading-cement and cut out the circles by means of cookie cutters.

Besides the articles listed below, you also need: Container for kneading of the cement (e.g. bowl with poss. lid), disposable gloves, stable support e.g. the lid of a plastic bucket, PET spray bottle (item 38 798 000), rolling pin (item 61 069 00), spatula (item 38 032 00), brush, small container with water, stand for the styrofoam-ball e.g. a can, cling film, turntable (item 89 259 00)

And this is how it works:

Step 1

Always wear plastic gloves while working!

Step 2

Mix the creative kneading-cement with water in the ratio 9:1 (9 parts of cement : 1 part of water). This corresponds to about 200 ml. Stir the water slowly, gradually add it while constantly kneading. Knead the crumbly mixture with damp disposable gloves (if necessary, moisten several times) until the desired consistency is achieved.

Hint: You can mix also, quickly and easily, the kneading-cement in a sealable container. Here also add the water gradually by stirring it constantly, then close the container and shake it well. That way there is less dust and the parts intermix perf

Step 3

Take some cement between the palms, press it flat and coat thinly around a half of the styrofoam-ball.

Step 4

Now you can sculpt the ball with uniform stroking movements by hands until the kneading-cement mixture covers uniformly and smoothly a half of the ball. If the cement is too dry for modelling, moisten it lightly with water from a spray bottle.

Step 5

For further processing, put some paper towel onto the can that you use as a stand and place the coated styrofoam-ball onto it. The paper towel prevents that the border marks of the can get too deep into the cement by pressure.

Step 6

Roll out about 6mm thick the remaining mixed kneading-cement between two layers of the cling film by using the rolling pin and cut-out circles in different sizes by using the round metallic cookie cutters. You can get great effects by decorating additionally several circles with a small circle pattern.

Step 7

The punched-out circles can be at best removed from the foil by using a spatula and then laid down onto the coated styrofoam-ball (the joints should be always damp, work out possibly with a slightly moistened brush).

Step 8

Let it dry at least for 1 day. The entire drying period lasts for several days. After about 21 days the object is weatherproof.

Step 9

To obtain a sophisticated look, you can paint further some circles with the Chalky Finish paint.

Craft Idea Small kneading-cement ball with circles