Instructions in 5 steps A particularly original decorative accessory for a festive table: stones made of Raysin casting powder, then painted and inscribed with a screen printing stencil.
Besides the articles listed below, you also need: Scales, mixing cup, scissors
And this is how it works: 1 ![]()
Step 1
Mix 150 g of creative-cement according to instructions, mix it evenly and pour out the big, oval stone in a casting mould. After about 1 hour, you can turn the mould upside down and remove the stone from the casting mould (demould). Allow the stone to dry thoroughly out for several days. Smooth the resulting stone edges with sandpaper.2 ![]()
Step 2
Paint the stone with the All Purpose lagoon paint. Let it dry out.3 ![]()
Step 3
Cut out the motif “Heilige Kommunion” from the screen printing stencil and peel off the backing paper from the stencil. Place the motif in the middle of the stone. Stretch the stencil slightly over the surface of the stone and rub it firmly with your fingers. The applied motif should not form any creases, should lie fully on the surface and should be snug fitting to the surface shape of the stone.4 ![]()
Step 4
Now spread, quickly and evenly, the white Chalky Finish paint over the motif and the letters on the stencil by means of the paintbrush. After stencilling, carefully remove the stencil sideways and clean it immediately with water. Let the stone dry well out.5 ![]()