item no.
34471000
CK moulding kit 3D hands
500g impression compound + 1000g Raysin
- Free shipping from €0.00
- Klimaneutraler Versand mit DHL GoGreen
- Sicherer Kauf auf Rechnung
- 30 Tage Geld-Zurück-Garantie
- Kostenlose Abholung beim Händler
- Kostenlose Rückgabe
Productdetails
A true-to-detail 3D plaster imprint of children's or adults' hands can be made with the material from this kit. To ensure a good final outcome, detailed instructions are included showing each step of the process in detail.
Contents:
500 g of impression material
1000 g of Raysin 100 (plaster powder)
1 bucket as impression material container
1 sandpaper
3 wooden skewers
1 instructions.
Skin-friendly, high-quality and fast-curing impression material. All materials have been thoroughly tried and tested.
Brief instructions (the instructions supplied in the pack explain the working steps in detail):
mix the blue impression material with water in the bucket provided, dip your hands inside at the desired position, wait a while, then carefully pull your hands out one by one. After drying, fill the mould with white plaster material. Allow to harden, remove the resilient impression material. After drying, the shaped model can be refined with sandpaper.
The impression material cures very quickly and becomes rubberlike. Therefore, dipping must be done very quickly after mixing. The mould can only be used once. To ensure a successful imprint, detailed instructions are enclosed in the pack. On YouTube a few explanatory videos can be found about making hand models with impression material.
Contents:
500 g of impression material
1000 g of Raysin 100 (plaster powder)
1 bucket as impression material container
1 sandpaper
3 wooden skewers
1 instructions.
Skin-friendly, high-quality and fast-curing impression material. All materials have been thoroughly tried and tested.
Brief instructions (the instructions supplied in the pack explain the working steps in detail):
mix the blue impression material with water in the bucket provided, dip your hands inside at the desired position, wait a while, then carefully pull your hands out one by one. After drying, fill the mould with white plaster material. Allow to harden, remove the resilient impression material. After drying, the shaped model can be refined with sandpaper.
The impression material cures very quickly and becomes rubberlike. Therefore, dipping must be done very quickly after mixing. The mould can only be used once. To ensure a successful imprint, detailed instructions are enclosed in the pack. On YouTube a few explanatory videos can be found about making hand models with impression material.
Share product: 
More Choices:
