Cement-house  with a half honeycomb

Craft Idea Cement-house with a half honeycomb

Cement-house with a half honeycomb

Difficulty

difficulty

Duration

30 min
Instructions in 8 steps Stick only half of our stencil with the honeycomb motif onto the concrete house. Painted with Chalky Finish, the house becomes a special eye-catcher.
Besides the articles listed below, you also need: Edible oil, sandpaper, craft wooden stick, brush, container for mixing of the cement, pad out of crepla or cardboard
And this is how it works:
1

Step 1

For the preparation, place the mould on a stable surface so that it does not wobble and spread out its inner side with edible oil.
2

Step 2

Fill a plastic bucket/bowl with about 220ml of water and add gradually about 2.2kg of the creative-cement powder. Stir this mixture with a wooden spatula until an uniform, pourable mass is reached.
3

Step 3

Pour the casting compound into the prepared mould (do not pour it quite to the upper edge). Allow the mixture to rest for 1-2 minutes. Thereby tap repeatedly and slightly onto the mould to release any air bubbles from the cement mass.
4

Step 4

Let it dry over the night.
5

Step 5

The very next day you can demould the object. Therefor, turn around the casting mould and lay it down on a pad as for example a sponge rubber or a cardboard. Work with a light pressure of the palm of your hand against the mould, thus air can not penetrate between casting object and mould. Keep tapping the mould gently on your pad, so that the cement object is completely detached from the mould.
6

Step 6

Let it harden. The curing time depends on the size and the temperature (best 1 up to several days).
7

Step 7

Small burrs and imperfections you can grind with a sandpaper.
8

Step 8

Finally, for a refined look, you can stencil the cement-house. Therefor, put the template onto the casting object and apply carefully some Chalky Finish paint by using the sponge stamp. Then remove the template and let it dry.
Used products For this craft idea, you need the following products of Rayher:
Creative-cement
item no. 34153000 Creative-cement
bucket 2,5kg
(2,2 kg)
currently not available
Casting mould: House
item no. 36061000 Casting mould: House
16x23,5cm, depth 4cm
Chalky Finish, white
item no. 38867102 Chalky Finish, white
Can 118ml, white
(15 ml)
Sponge stamp
item no. 3843400 Sponge stamp
3 sizes: 1, 2, 3cm, tag-bag 3 pcs