Faceted glass vase with stripes

Craft Idea Faceted glass vase with stripes

Faceted glass vase with stripes

Difficulty

difficulty

Duration

60 min
Instructions in 5 steps Taped off areas give this glass vase a special touch. When painting it, make sure that the colours flow gently into each other and overlap.
Besides the articles listed below, you also need: Masking tape
And this is how it works:
1

Step 1

Before the creative designing, clean the glass vase grease and dust-free with water and detergent.
2

Step 2

Stick on the double-sided adhesive tape at the upper half of the vase, back and forth irregularly.
3

Step 3

Start with the pink paint Chalky Finish which has to be applied well covering the lower part of the glass vase by using the sponge stamp. Afterwards, dab off the salmon pink Chalky Finish at the lower part and the white Chalky Finish at the upper third of the vase. The colour transitions should be nicely uniform and not too sharp. For a harmonious colour gradient, at best pass each colour evenly into the other one.
4

Step 4

After a short drying of the colour, you can take off the masking tape from the glass vase.
5

Step 5

After four days drying time, the paint on the glass vase is so hardened that you can fix it in the oven according to the instructions of the label and that way, you can wash it in a dishwasher.
Used products For this craft idea, you need the following products of Rayher:
Glass vase, faceted
item no. 56929000 Glass vase, faceted
10x10x18cm, 1000ml
Sponge stamp
item no. 3843400 Sponge stamp
3 sizes: 1, 2, 3cm, tag-bag 3 pcs
Special doublesided adhesive tape
item no. 3339300 Special doublesided adhesive tape
tab-bag, roll 6 m
(0,9 m)