Gold mobile phone chain

Craftideas
Gold mobile phone chain

Difficulty

Duration

60 min

Download Idea as PDF

Share Idea

Instructions in 15 steps The hang-on mobile phone patch is universally applicable. The diverse silver-coloured chain links combined with a click-fit bead bracelet become a practical mobile phone accessory.

Besides the articles listed below, you also need: Scissors, toothpick

And this is how it works:

Step 1

Preparing the click-fit bead string
Insert the threading silk into the bead stringing needle and pass it through a crimp cover and the flat metal ring. Then lead the end of the thread back through the crimp cover. Align the crimp cover and the jump ring in the middle.

Step 2

Take a toothpick to spread a small drop of jewellery glue inside the crimp cover.

Step 3

Use flat round pliers to crimp the crimp cover firmly. The thread shouldn't slip out.

Step 4

String glass waxed beads and small Rocailles beads in turn from both ends of the thread, starting and ending with a glass waxed bead.

Step 5

To finish off, pass both threads through a crimp cover and the jump ring of the lobster clasp, then lead the threads back through the crimp cover.

Step 6

Coat the crimp cover with glue and secure it in place using the flat round pliers. Cut off the excess thread close to the crimp cover.

Step 7

Preparing the link chains
Cut the embossed Paperclip link chain into 2 parts using wire cutters: 22 cm and 28 cm.

Step 8

Connect each piece (22 cm and 28 cm) to one of the ends using a jump ring and a large lobster clasp.

Step 9

Attach the smaller lobster clasp to the oval jump ring on the other end of the 28 cm long piece.

Step 10

Attach the smaller lobster clasp to one end of the Paperclip link chain (80 cm) using an oval jump ring.

Step 11

Connect the twisted metal ring to the other end using an oval jump ring.

Step 12

Connecting the different pieces of jewellery
By clicking in the lobster clasps, connect the different pieces to create a mobile phone chain.

Step 13

Insert the hang-on patch into your mobile phone case and place your mobile phone inside.

Step 14

Attach the mobile phone chain to the eyelet of the hang-on patch.

Tip: Use two pairs of pliers to get a good grip on the jump ring. Open it by twisting away from you and close it by twisting back towards you. Do not pull it apart.