Marbled card B6 „Merci“

Craftideas
Marbled card B6 „Merci“

Difficulty

Duration

30 min

Download Idea as PDF

Share Idea

Instructions in 4 steps Pour the marble effect paint drop-by-drop onto the water surface in the bucket. In order to create a unique card, use a wooden skewer to achieve the marble effect on the surface and dip the card in.

Besides the articles listed below, you also need: Plastic bucket, Copy paper, Disposable gloves

And this is how it works:

Step 1

Choose a plastic bucket that is enough large/deep to dip the card thoroughly into it. Then, fill the plastic bucket with cold water. Thereafter, shake well the Marble paint bottles (about 30 sec), especially the silver one since this colour contains metal particles. Drip the three colours successively as near to the water surface. Then immediately draw the marble pattern with a wooden skewer.

Step 2

We recommend you to wear disposal gloves. Hold the card transversely and immerse it slowly. Dip completely the front side and up to 1/3 of the reverse side. Retain it that way for a while and take it out quickly. Before taking out, puff a bit onto the water surface so that the paint flows to the edge. let the card dry well out.

Step 3

Remove the paint residues with a sheet of paper (with the edge of the paper). The water must be clean for a further marbling. If heavily soiled, use fresh water.

Step 4

Cut a blank out of the letterhead measuring 8 × 5.5cm and affix it onto the card by means of the double-sided adhesive tape. Thereafter, stamp the parchment coloured letterhead by means of the stamp “Merci” and the stamp pad. Then, finish the paper cut-out of 6.5 x 4cm. Cut it so close that the word “Merci” is centrally located and stick it onto the white paper cut-out by means of the 3D-adhesive squares.

Craft Idea Marbled card B6 „Merci“