item no.
34389000
Latex full-form casting mould: Pine cone
7x8.5cm, tab-bag 1pc
- Free shipping from €0.00
- Klimaneutraler Versand mit DHL GoGreen
- Sicherer Kauf auf Rechnung
- 30 Tage Geld-Zurück-Garantie
- Kostenlose Abholung beim Händler
- Kostenlose Rückgabe
Productdetails
Dimensions of the pine cone: 7x8.5cm with plinth
Material requirements with plinth: Raysin 200, 200 g / creative-concrete 230 g
Material requirements without plinth: Raysin 200, 150 g / creative-concrete 200 g
(Also suitable for soap and wax).
Durable full-shaped moulds out of latex, perfect for casting with creative-concrete and Raysin. Always reusable. The casting is very simple, because the elastic latex material makes it easy to remove the cast item from the mould.
This is how it works:
hang the mould in a corresponding glass. If the glass opening is too large, you can place 4 wooden spatulas under the edge of the silicone mould to square. In order to avoid the wooden spatulas to slip into the glass, you must put a piece over the edge of the glass. Fill it with the casting compound, shake it gently until the air bubbles have risen to the surface and disappeared. Allow the casting compound to dry and harden before demoulding.
If desired, you can decorate your artwork creatively (the figurine must be completely dry): for example, with Chalky Finish chalk paint of Rayher, Rayher Deco metal of Rayher, with mirror foil or with other creative techniques. This is neither difficult nor tedious. Thus, you can quickly create great decorations and gift ideas that will not only please you…
Material requirements with plinth: Raysin 200, 200 g / creative-concrete 230 g
Material requirements without plinth: Raysin 200, 150 g / creative-concrete 200 g
(Also suitable for soap and wax).
Durable full-shaped moulds out of latex, perfect for casting with creative-concrete and Raysin. Always reusable. The casting is very simple, because the elastic latex material makes it easy to remove the cast item from the mould.
This is how it works:
hang the mould in a corresponding glass. If the glass opening is too large, you can place 4 wooden spatulas under the edge of the silicone mould to square. In order to avoid the wooden spatulas to slip into the glass, you must put a piece over the edge of the glass. Fill it with the casting compound, shake it gently until the air bubbles have risen to the surface and disappeared. Allow the casting compound to dry and harden before demoulding.
If desired, you can decorate your artwork creatively (the figurine must be completely dry): for example, with Chalky Finish chalk paint of Rayher, Rayher Deco metal of Rayher, with mirror foil or with other creative techniques. This is neither difficult nor tedious. Thus, you can quickly create great decorations and gift ideas that will not only please you…
Share product: 
Customers also bought
