item no.
36210000
Silicone mould set Candle casting
- Free shipping from €0.00
- Klimaneutraler Versand mit DHL GoGreen
- Sicherer Kauf auf Rechnung
- 30 Tage Geld-Zurück-Garantie
- Kostenlose Abholung beim Händler
- Kostenlose Rückgabe
Productdetails
With these top-quality silicone casting moulds, you can cast true eye-catchers. Whether it’s about bubble candles of various sizes, popular U-shaped candles or nicely ribbed pillar candles – let’s get started!
Contents:
1 x silicone casting mould Bubble candles
1 x silicone casting mould U-shaped ribbed candles
1 x silicone casting mould Ribbed pillar candles
Candle casting mould Bubble with various application possibilities: 3 different sizes of bubble candles can be cast at the same time, 12 pieces in total. Various heights can also be considered.
Material requirements (wax pellets) for one candle in the following sizes: small bubble candle 35 x 35 mm (approx.40 g), medium-sized bubble candle 40 x 40 mm (approx.53 g), large bubble candle 50 x 50 mm (approx.77 g).
Silicone casting mould „Stumpenkerze geriffelt“ (ribbed pillar candle), ø 5 cm, height 8.7 cm, including metallic wick holder.
Casting moulds made of high-quality silicone, extremely elastic, dimensionally stable and frost- and heat-resistant (from -40°C to +240°C). Perfect for casting with wax. The mould is suited to all kinds of waxes. Maximum wax quantity – 135 g.
How to use the casting mould:
Prior to casting, the mould must be clean, dust-free and dry. Pierce a small hole through the middle of the bottom of the silicone casting mould using a sharp tool and pull the wick through. Turn the casting mould upside down and fix the wick to the pierced hole by means of a needle or wooden skewer. Melt the wax in a bain-marie, dye it if desired and pour it into the mould. Let it cool down thoroughly. After demoulding, clean the mould with water and some dishwashing detergent; it retains its shape and can be reused. Detailed instructions can be found on the package.
Silicone casting mould „Kerze U-Form geriffelt“ (ribbed U-shaped candle), 8.4 x 3.9 cm, height 8.6 cm, including metallic wick holder. The mould is suited to all kinds of waxes. Maximum wax quantity – 155 g.
How to use the casting mould „Kerze U-Form geriffelt“:
Prior to casting, the mould must be clean, dust-free and dry. Use a pointed object to pierce a small hole on each side of the bottom of the silicone casting mould and pull the wick through the resulting hole. Put the mould on a stable, level surface. Put the metal wick holder over the opening of the mould, then insert and fix both wick ends in the holes of the wick holder. Melt the wax in a bain-marie, dye it if desired and pour it into the mould. Let it dry thoroughly out. Remove the wick from the wick holder. After demoulding, clean the mould with water and some dishwashing detergent; it retains its shape and can be reused. Detailed instructions are included in the package.
Tip:
None of these moulds have a wick. We recommend ordering the flat wick FD19 (item no.31589000) together with this pack. Sufficient for several candles.
Contents:
1 x silicone casting mould Bubble candles
1 x silicone casting mould U-shaped ribbed candles
1 x silicone casting mould Ribbed pillar candles
Candle casting mould Bubble with various application possibilities: 3 different sizes of bubble candles can be cast at the same time, 12 pieces in total. Various heights can also be considered.
Material requirements (wax pellets) for one candle in the following sizes: small bubble candle 35 x 35 mm (approx.40 g), medium-sized bubble candle 40 x 40 mm (approx.53 g), large bubble candle 50 x 50 mm (approx.77 g).
Silicone casting mould „Stumpenkerze geriffelt“ (ribbed pillar candle), ø 5 cm, height 8.7 cm, including metallic wick holder.
Casting moulds made of high-quality silicone, extremely elastic, dimensionally stable and frost- and heat-resistant (from -40°C to +240°C). Perfect for casting with wax. The mould is suited to all kinds of waxes. Maximum wax quantity – 135 g.
How to use the casting mould:
Prior to casting, the mould must be clean, dust-free and dry. Pierce a small hole through the middle of the bottom of the silicone casting mould using a sharp tool and pull the wick through. Turn the casting mould upside down and fix the wick to the pierced hole by means of a needle or wooden skewer. Melt the wax in a bain-marie, dye it if desired and pour it into the mould. Let it cool down thoroughly. After demoulding, clean the mould with water and some dishwashing detergent; it retains its shape and can be reused. Detailed instructions can be found on the package.
Silicone casting mould „Kerze U-Form geriffelt“ (ribbed U-shaped candle), 8.4 x 3.9 cm, height 8.6 cm, including metallic wick holder. The mould is suited to all kinds of waxes. Maximum wax quantity – 155 g.
How to use the casting mould „Kerze U-Form geriffelt“:
Prior to casting, the mould must be clean, dust-free and dry. Use a pointed object to pierce a small hole on each side of the bottom of the silicone casting mould and pull the wick through the resulting hole. Put the mould on a stable, level surface. Put the metal wick holder over the opening of the mould, then insert and fix both wick ends in the holes of the wick holder. Melt the wax in a bain-marie, dye it if desired and pour it into the mould. Let it dry thoroughly out. Remove the wick from the wick holder. After demoulding, clean the mould with water and some dishwashing detergent; it retains its shape and can be reused. Detailed instructions are included in the package.
Tip:
None of these moulds have a wick. We recommend ordering the flat wick FD19 (item no.31589000) together with this pack. Sufficient for several candles.
Share product: 
