item no.
36207000
Silicone mould set Winterlicht
Silicone mould set Winterlicht, incl. 4 taper candles, 2 transfer sheets
- Free shipping from €0.00
- Klimaneutraler Versand mit DHL GoGreen
- Sicherer Kauf auf Rechnung
- 30 Tage Geld-Zurück-Garantie
- Kostenlose Abholung beim Händler
- Kostenlose Rückgabe
Productdetails
Set contents:
1 silicone casting mould Candle holder Hexagon, 16 x 14 cm, height 2.5 cm, incl. 3 different foil templates (5 pieces per each).
1 silicone casting mould Candle holder Star, 18.5x18.5 cm, height 2.5 cm, incl. 3 different foil templates (5 pieces per each)
4 white tapered candles with a bell top, 19 cm long, ø 2.1 cm.
2 sheets of transfer foil, 10 x 21 cm each, with various designs, Christmassy motifs and texts for decorating candles.
Detailed instruction manual included.
Application:
Great for casting with e.g. creative-cement 5in1, jewellery concrete, Raysin casting powder, casting resin or wax (not suitable for foodstuffs).
Material requirements for both casting moulds: e.g. jewellery concrete/creative-cement 5:1 (about 620 g), Raysin 200 (about 580 g).
Different casting results can be achieved by covering individual casting mould parts with the enclosed foil templates. The enclosed instruction manual shows exactly how to do this with the various foil templates.
The casting mould are made of high-quality silicone, extremely elastic, dimensionally stable and frost- and heat-resistant (from -40°C to +240°C). Thanks to the extremely elastic silicone material, the shapes can be easily demoulded after drying. Clean the moulds afterwards with water and some dishwashing detergent; thus, they retains their shape and can be reused.
The most suitable paints and media for painting, writing on and adorning are the acrylic paints, e.g. Outdoor Paint, Allround Paint, Ultimate Sheen, Chalky Finish chalk paint, markers, decorative metal and much more.
You can decorate candles nicely with Christmassy motifs and words from the transfer foil. This is also possible on items with smooth, non-absorbent surfaces.
And this is how it works:
Cut out the desired motifs and dip them briefly, for about 30-60 seconds, in lukewarm water until the carrier paper starts to detach from the transfer foil. Then place the motif onto the candle or a smooth, non-absorbent surface.
1 silicone casting mould Candle holder Hexagon, 16 x 14 cm, height 2.5 cm, incl. 3 different foil templates (5 pieces per each).
1 silicone casting mould Candle holder Star, 18.5x18.5 cm, height 2.5 cm, incl. 3 different foil templates (5 pieces per each)
4 white tapered candles with a bell top, 19 cm long, ø 2.1 cm.
2 sheets of transfer foil, 10 x 21 cm each, with various designs, Christmassy motifs and texts for decorating candles.
Detailed instruction manual included.
Application:
Great for casting with e.g. creative-cement 5in1, jewellery concrete, Raysin casting powder, casting resin or wax (not suitable for foodstuffs).
Material requirements for both casting moulds: e.g. jewellery concrete/creative-cement 5:1 (about 620 g), Raysin 200 (about 580 g).
Different casting results can be achieved by covering individual casting mould parts with the enclosed foil templates. The enclosed instruction manual shows exactly how to do this with the various foil templates.
The casting mould are made of high-quality silicone, extremely elastic, dimensionally stable and frost- and heat-resistant (from -40°C to +240°C). Thanks to the extremely elastic silicone material, the shapes can be easily demoulded after drying. Clean the moulds afterwards with water and some dishwashing detergent; thus, they retains their shape and can be reused.
The most suitable paints and media for painting, writing on and adorning are the acrylic paints, e.g. Outdoor Paint, Allround Paint, Ultimate Sheen, Chalky Finish chalk paint, markers, decorative metal and much more.
You can decorate candles nicely with Christmassy motifs and words from the transfer foil. This is also possible on items with smooth, non-absorbent surfaces.
And this is how it works:
Cut out the desired motifs and dip them briefly, for about 30-60 seconds, in lukewarm water until the carrier paper starts to detach from the transfer foil. Then place the motif onto the candle or a smooth, non-absorbent surface.
Share product: 
