3D camper

Craftideas
3D camper

Difficulty

Duration

210 min

Download Idea as PDF

Share Idea

Instructions in 5 steps Bonjour liberté - this camper stands for freedom: even if you can't go on holiday at the moment.

Besides the articles listed below, you also need: Aluminium foil, Kitchen roll

And this is how it works:

Step 1

Assemble your camper according to the construction manual. Glue with wood/cork glue if necessary.

Hint: Please note that you do not paint the butt joints with paint. Because paint on the joints can cause the wood to swell and then cause problems when put together.

Step 2

Paint with the coral glaze paint the lower two thirds of the side panels, the doors, the lower rear part and the two lower front parts. Use the alabaster white glaze for the upper third of the side panels, the side parts of the seats and the wide stripes of the seats, rear & front windows, the large and medium roof plate, door handles, wheel rims and the lock rings for the wheels.

Step 3

Take the stone grey glaze for the base plate, the centre lateral decorative strips, the narrow seat stripes, the boot lid, the centre rim rings, the bumpers, the trailer hitch, the small front panel, the wing mirrors, the cooler, the lights and the last small rooftop with roof racks.