Instructions in 6 steps Twin-pack casting: first of all, cast the candle bowls out of Raysin. Once dried, fill them with melted wax pellets: your modern candle decoration is now ready.
Besides the articles listed below, you also need: Mixing cup, fine gravel, cooking pot and hob, plastic mug
And this is how it works: 1 ![]()
Step 1
Cast the small bowl by means of the plastic balls and the casting powder Raysin. Follow the casting instructions on the Raysin packaging.2 ![]()
Step 2
After demoulding, let the bowl out of Raysin to dry well out (for several days). Then coat its inner side with the transparent Chalky ultra-matt varnish. Leave to dry again (our recommendation: 1 day).3 ![]()
Step 3
Melt the wax according to the instructions on the wax pellet packaging (in a water bath at 60 degrees). Colour the wax to your liking using the colouring tablets: stir the liquid wax with a wooden craft stick until an uniform pink colour is achieved.4 ![]()
Step 4
Place the tealight candle wick in the middle of the bowl and slowly pour in the wax. We recommend pouring the wax up to 1 cm below the rim of the Raysin bowl.5 ![]()
Step 5
Fix the wick by inserting 2 wooden skewers so that it remains in the middle when cooled down.6 ![]()
Step 6
Let the wax cool down and cut the wick to about 1 cm.Related craft ideas Looking for similar craft ideas? You can find them here: ![]()
![Difficulty -]()
![]()
![Difficulty -]()
![]()
![Difficulty -]()
Cement candle light with leave pattern
DIFFICULTY
Beeswax candle
DIFFICULTY
Large raysin candle bowl
DIFFICULTY