Nupsi placeholder Nordic Houses

Nupsi placeholders „Nordic Häuser“ with thickness of 4 + 10 mm can be used when casting with PET and silicone casting moulds of Rayher. They are suited to e.g. „Nordic Häuser“ wooden shapes (item no.46810505) of Rayher, „Nordic Häuser“ felt shapes (item no.46808000) of Rayher and to „Nordic Häuser“ veneer wood strip (item no.46809505) of Rayher whose row of small veneer wood houses can be split and whose small houses can be used separately.

Contents: 20 Nupsi placeholders of different sizes:
2.0 x 4.2 cm - 1 piece 10 mm thick + 3 pieces 4 mm thick
2.7 x 4.6 cm - 1 piece 10 mm thick + 2 pieces 4 mm thick
2.2 x 4.0 cm - 2 pieces 10 mm thick + 4 pieces 4 mm thick
2.2 x 4.4 cm - 2 pieces 10 mm thick + 5 pieces 4 mm thick.

They are made of sturdy foam rubber and can be used 2-3 times if used properly.

And this is how is done:
Affix the placeholder in the mould at the desired spot using the double-sided adhesive tape, pour in the casting compound, let it dry, then demould the resulting casting and remove the placeholder with e.g. a sharp needle. If necessary, you can polish up the edges with sandpaper. The resulting recess can now be decorated e.g. with above mentioned items.

You’ll need in addition: PET casting mould, casting material (e.g. white Raysin 200 or black Raysin 250, creative-cement 5-in-1, jewellery concrete), double-sided adhesive tape, needle and sandpaper.