Small mushroom out of the kneading-cement

Craft Idea Small mushroom out of the kneading-cement

Small mushroom out of the kneading-cement

Difficulty

difficulty

Duration

15 min
Instructions in 12 steps The shape of the mushroom is achieved by means of a styrofoam cone. When wrapped with cling foil, the styrofoam can be easily removed once it has dried out. Then decorate the mushroom out of kneading-cement.
Besides the articles listed below, you also need: Natural stick about 28 cm, container for kneading of the cement (e.g. bowl with lid) Disposable gloves, cling film, stable support e.g. the lid of a plastic bucket, brush, small container with water, hot glue
And this is how it works:
1

Step 1

Always work without fail with the disposable gloves!
2

Step 2

Mix the creative kneading-cement (200g) with water in the ratio 9:1 (9 parts of cement : 1 part of water). This corresponds to about 22 ml. Stir the water slowly, gradually add it while constantly kneading. Knead the crumbly mixture with damp disposable gloves (if necessary, moisten several times) until the desired consistency is achieved.

Hint: You can mix also, quickly and easily, the kneading-cement in a sealable container. Here also add the water gradually by stirring it constantly, then close the container and shake it well. That way there is less dust and the parts intermix perfectly.

3

Step 3

Place the natural stick onto the cling film and coat it with the kneading-cement. The coated natural stick can be uniformly rolled with the cling film. Let it dry.
4

Step 4

Now place the styrofoam-cone stably onto a stable surface and cover it with the cling film.
5

Step 5

Mix the remaining creative kneading-cement (300g) as already described above, in the ratio 9 : 1 with water (9 parts of cement : 1 part of water). This corresponds to about 33 ml.
6

Step 6

Spread the cement-mixture by hand onto the coated cone and sculpt the lower edges slightly outwards. Potentially, paint over the cement with a slightly moistened brush smoothly upwards.
7

Step 7

If the cement is too dry for modelling, moisten it lightly with water from a spray bottle.
8

Step 8

For a great effect, you can draw in lines or other pattern by using the modelling tool. Let it dry at least 1 day.
9

Step 9

The entire drying period lasts for several days. After about 21 days the object is weatherproof.
10

Step 10

Drill in the birch disc a hole in the size of the coated cement-stick and secure it for example with a hot glue.
11

Step 11

Release the styrofoam-cone and the cling film out of the mushroom hat made of the creative-cement and stick them onto the cement-stick by using a hot glue.
12

Step 12

Depending on your desire, you can dab afterwards the cement-mushroom with some white paint or decorate with the mirror-foil.
Used products For this craft idea, you need the following products of Rayher:
Creative kneading-cement
item no. 34211000 Creative kneading-cement
bag 1kg
(500 g)
Styrofoam cone
item no. 3300900 Styrofoam cone
full, height 12 cm
Birch disc round nature
item no. 85319000 Birch disc round nature
Ø15-17cm x 2cm height, bag 1pc
All-purpose paint, white
item no. 38000102 All-purpose paint, white
bottle 59 ml, white
Glue for foil, 51 g
item no. 3338400 Glue for foil, 51 g
clear
Equipment For this idea, you need the following little helpers:
PET spray bottle transparent 50ml
item no. 38798000 PET spray bottle transparent 50ml
approx. ø 3,1x,11,5 cm tab-bag 1pc
Sponge stamp
item no. 3843400 Sponge stamp
3 sizes: 1, 2, 3cm, tag-bag 3 pcs
Sandpaper set, 40+60 grit
item no. 8953000 Sandpaper set, 40+60 grit
115x280 mm, f.Shabby Chic, tab-bag 4pcs.